Quantcast
Channel: advice for a noob please. cnc Miller to 3d print.
Viewing all articles
Browse latest Browse all 6

Re: advice for a noob please. cnc Miller to 3d print.

0
0
Hi Neil,

I have an ISEL CPM2018 with his original integrated controler IMC4.
I have made an extruder and an temperature regulator to extrude 3mm PLA thrue a 0.5mm hole.
The IMC4 can control 4axis so you can plug the the extruder to the 4th axis.
The first results are good but, because there's always a but, the IMC4 controler is not adapted to do 3d printing. It is doing small stops between each direction changes. By the way it generate an exess of PLA at each corner and the circles are not circular.

I think that it can be solved adding a kit called IMC4 booster see here : [axemotion.com]. But I fond it to expensive.

What I am looking to do now is to try to use a RAMPS board and to replace the IMC4 microprocessor by it as it is done with the booster kit. The only think is that I am ot able to find the shematic of the IMC4. So my oscilloscope is ready to find the good signals.

The easiest way is perhaps the replace fully the original controler by an other one.

Philippe
France

Viewing all articles
Browse latest Browse all 6

Latest Images

Trending Articles





Latest Images